60V/10A DC Power supply

TPR6010S are constant voltage and constant current signal-channel power supply,voltage and current continuous adjustable TECHNICAL INDEXInput Voltage: AC220V±10%.50Hz;AC110V±10%.60Hz(Optional)Output Voltage Range:0-60VOutput Current Range:0-10ARated Power:600WDisplay Precision:0.1V±2bit 0.01A±2bitStabilily of Voltage: ≤0.01%+3mVStabilily of Load: ≤0.01%+5mV(≤5A);≤0.01%+10mV(>5A)Ripple and Noise: ≤3mVrmsShape dimension: (L)380*(W)260*(H)170mmMethod of Protection:over-temperature protectionCooling model:fan Notes 1.Constant pressure/Constant current characteristicsThe working characteristics of these series of power supply called constant pressure/constant current  automatically converts type .It can change with the load change in the constant pressure and constant current state continuous change.The intersection between the constant pressure and constant current called cue. For example, If the load made the power work in constant pressure way, It can ouput stable voltage. With the increasing of load ,the output voltage will keep stable until reach the preset current limiting value. The ouput current will keep stable when reach the current limiting value. Output voltage with further increased load decreased in proportion The conversion for constant pressure and constant current is indicated by the LED in front panel. The similar automatic conversion from constant pressure to constant current is decreased along with the decease of the load. When constant pressure ,the CV indicator lights, when constant current, the CC indicator lights. 2.Operating methodMaking the power switch in the “OFF” positionMake sure that the output power voltage is correctConnect the power supplyMaking the swich power in the “ON” positionAdjust the “voltage” and “current” knob to the needed voltage and current.Connect the outer load to “+”,”-“ output terminalsThe output terminals “+” or “-“tweeters must connect with GND tweeters when using in the higher requirements place , It can reduce output ripple voltage 3.MaintenanceIf insurance pipe burn broken,and voltage stabilizer and steady flow indicator light is extinguished, The power will stop working ,please do not open the tupperware except  happens some problem. To find and modify insurance tube burn broken cause Then use the same value insurance tube replaced . 4.Power installation, use and maintenance guidelines The ATTEN power supply produced by our company has used the contemporary world advanced technology achievements. After thorough thermal design and structure optimization and become a unique multiterminal function device . Because of this function device category, series and norms breed difficult to count , Its function characteristics and physical properties is different., So in the maintenance of the installation and use have many special precautions ,So, we make the following state:

60V/10A DC Power supply